+86 755-83044319

Technical Blogs

/
  • Updated: 2022-03-17
  • Views: 8799
The first part of the entry course of the embedded system this week -PCB design. The goal of our course is set: master a PCB design skill to master a future useful programming language to deeply understand the composition and core points of the "embedded system".
  • Updated: 2022-03-17
  • Views: 8236
IGBT is called the insulation grid bipolar transistor, which is a widely used semiconductor device in the electrical electronics industry. The module described here is a specific form of packaging, which is the carrier of the IGBT chip and protects it. With the booming development of the new energy vehicle industry in ……
  • Updated: 2022-03-17
  • Views: 8877
In 1947, American physicist Socci, Badin and Blaton cooperated invented the transistor -a three -fulcrum semiconductor solid element. Because the transistor has the characteristics of low power consumption, small volume, relatively cheap price, flexible connection methods, etc., after the crystalline tube is released, ……
  • Updated: 2022-03-17
  • Views: 9407
Abstract: Analysis shows that the rapid development of new energy and driverless cars, the role of vehicle regulatory chips is becoming more important. This is an important direction for the application of the chip industry. Explain the relevant verification processes and standards of integrated circuit design companie……
  • Updated: 2022-03-17
  • Views: 9075
Use the circuit component symbol to represent the diagram of the circuit connection, called the circuit diagram. Circuit diagram is a principle layout diagram of the principle of component components and device relationships with the need for research and engineering planning. Electrical products provide planning solut……
  • Updated: 2022-03-17
  • Views: 8053
Why do two 0.1UF and 0.01UF capacitors are always placed in the circuit? The two concepts of bypass and decoupling bypass capacitors and decoupling capacit are common in circuits, but it is not easy to understand. Explaining a capacitor article: The principle of animation explanation capacitance work, you can click for……
  • Updated: 2022-03-17
  • Views: 8328
Disclaimer: This article is reproduced from "Hundred Core Bai". This article only represents the author's personal point of view, does not represent the Siko micro -industry views, just to reprint and share, support the protection of intellectual property rights, please indicate the original source and authors. For inf……
  • Updated: 2022-03-17
  • Views: 8378
The locking loop (PLL) is a feedback system, where the voltage control oscillator (VCO) and the phase comparator are connected to each other, so that the oscillator can maintain a constant phase angle relative to the reference signal. What problems do you encounter in the process of using PLL? Our engineers have compil……
  • Updated: 2022-03-17
  • Views: 9017
The diode is a passive device that allows the current to flow in one direction. Because there are too many types of diodes, choose according to circuit requirements. This article describes three widely used diodes: rectifier, Schottky diode, and Qina diode and when to use them. Attribute definition
  • Updated: 2022-03-17
  • Views: 8197
1. Introduce the development of semiconductor chip technology to enable power devices to effectively use electrical energy, such as crystal gates and diode, whi……
  • Updated: 2022-03-17
  • Views: 9886
The oscilloscope is the most important power test and representation tool. At present, many oscilloscope can provide a dedicated power measurement option to help engineers automatically complete many important tests, such as the German technology Infiniivision X series oscilloscope. The power supply not only needs to m……
  • Updated: 2022-03-17
  • Views: 7925
Switch and diode output

Service hotline

+86 0755-83044319

Hall Effect Sensor

Get product information

WeChat

WeChat